Joint Strip, System 2

Measure

Length: 379 mm (14,9 inches)

Packaging

36-pack = enough for app. 2,5-3 m2 (≈ 30 sq ft)

Stone grey, Art. No. 3675SG
Graphite grey, Art. No. 3675GG

Material

Made of environmentally friendly recyclable PP-composite (polypropylene).
UV- and Colorstabilized for climate in Arizona.
FDA approved. No emissions. (No PVC).

Sustainability and environment

One of our biggest tasks is to make the world more sustainable. We must ensure that there are no harmful substances that reach nature or people. That is why we have chosen to work with the best possible and purest raw materials. Both to ensure a long life for the product, but also to make it safe for our staff in production and those who use our products.

We do not strive to find the cheapest raw material, as that would affect our promise; to make safe quality products.

We have been making durable floors since we invented the first floor tile on the market back in 1972. BERGO is the original and we know what it takes to make a good product.

We care about our children's future, that's why SUSTAINABILITY is one of our core values.

Assembling and documents

NOTE! For indoor use only. Do not use in temperature varying environments where expansion function disappears when the Joint strips are applied. Are not recommended in outdoor environments or for example a conservatory, with temperature variations.

We recommend that Joint strips are installed at the same pace as you lay the Bergo floor tiles.

Things to consider before you install Bergo Joint strips

Remember that the Joint strips remove the floor's ability to expand, so it is important to add the Joint strips in environments that have a constant temperature.

By a new installation of Bergo Elite / Nova, keep the floor tiles in a few hours in the room that the floor should be installed so that they get the same room temperature.

As the floor expands in varying temperatures, it can reduce the gaps between the tiles and it may therefore be difficult to add the Joint strips on a surfaces with Bergo tiles that already are installed since earlier.

We therefore recommend that the Joint strips are installed at the same pace as you lay the Bergo floor tiles.

Use a rubber hammer when installing the Joint strips. At smaller amount of Joint strips, you can also press them down by hand. Another tip is to use a mini role (such as used in wallpapering or similar).

Downloadable material:

Bergo Joint strip, System 2 assembling instruction